SORT BY:

LIST ORDER
THREAD
AUTHOR
SUBJECT


SEARCH

IPS HOME


    [Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

    Re: iSCSI: large keys during login?



    
    Julian
    
    The sections you refer to describe Text Request and Text Response PDUs.
    Unless I've misunderstood the spec, neither of those PDUs can be used
    during login; the only PDUs that are valid for use during login are Login
    Request and Login Response.
    
    I was under the impression that login phase was a very simple
    exchange; initiator sends a single Login Request PDU, target replies
    with a single Login Response PDU, repeat until logged in or rejected.
    
    How can you have a key value span multiple Login Request or Response
    PDUs? Unlike the Text PDUs, the Login PDUs do not contain the fields
    required to permit text to span PDUs (target tag, final bit, etc.). So
    there's no defined way to determine a text payload is being continued
    in a subsequent Login Request or Response PDU.
    
    Regards
    
    Andy
    
    
    > Pat,
    > 
    > For spanning look at 9.10.4 and 9.11.4.
    > 
    > I assume that the text covers whatever does not fit.
    > 
    > 
    > Regards,
    > Julo
    > 
    > 
    > 
    > 
    > "THALER,PAT (A-Roseville,ex1)" <pat_thaler@agilent.com>
    > 04/30/2002 02:24 AM
    > Please respond to "THALER,PAT (A-Roseville,ex1)"
    > 
    >  
    >         To:     Julian Satran/Haifa/IBM@IBMIL, Bill Studenmund 
    > <wrstuden@wasabisystems.com>
    >         cc:     andy currid <andy@windriver.com>, ips@ece.cmu.edu, owner-ips@ece.cmu.edu
    >         Subject:        RE: iSCSI: large keys during login?
    > 
    >  
    > 
    > Julian,
    >  
    > I assume you mean that keys can span requests as well. I can't find 
    > anything in the draft that says that they can though there also isn't 
    > anything that says they can't. Does this only apply to key-value pairs too 
    > long to fit in a single response or can a short key-value pair span a 
    > request/response when multiple key-value pairs are packed into a PDU?
    >  
    > The draft should clarify.
    >  
    > -----Original Message-----
    > From: Julian Satran [mailto:Julian_Satran@il.ibm.com]
    > Sent: Monday, April 29, 2002 3:54 PM
    > To: Bill Studenmund
    > Cc: andy currid; ips@ece.cmu.edu; owner-ips@ece.cmu.edu
    > Subject: Re: iSCSI: large keys during login?
    > 
    > 
    > Key can span responses. Bookmarking is for things that have multiple 
    > answers - like the SendTargets - Julo 
    > 
    > 
    > 
    > Bill Studenmund <wrstuden@wasabisystems.com> 
    > Sent by: owner-ips@ece.cmu.edu 
    > 04/30/2002 01:15 AM 
    > Please respond to Bill Studenmund 
    >         
    >         To:        andy currid <andy@windriver.com> 
    >         cc:        <ips@ece.cmu.edu> 
    >         Subject:        Re: iSCSI: large keys during login? 
    > 
    >  
    > 
    > 
    > On Mon, 29 Apr 2002, andy currid wrote:
    > 
    > >
    > > Hi
    > >
    > > In iSCSI draft 12, chapter 10, the Kerberos and SPKM authentication
    > > mechanisms specify a limit of 64k on their unencoded key values.
    > >
    > > Given that these keys are only used during login and, during login,
    > > the PDU size in use is 8k and, unlike text commands, there is no
    > > bookmarking, how can you send a key value of this size during login?
    > 
    > I thought that was covered. If you say you can do kerberos or SPKM, you
    > are saying you can do 64k.
    > 
    > Take care,
    > 
    > Bill
    > 
    
    
    --
    Andy Currid                                       andy@windriver.com
    Server Products Group                       http://www.windriver.com
    Wind River Networks                         Phone : (1) 510 749 2191
    500 Wind River Way, Alameda, CA 94501       Fax   : (1) 510 749 2560
    


Home

Last updated: Wed May 01 02:18:30 2002
9909 messages in chronological order