Hi Marj,
The current status of the draft is that it
has been forwarded to Allison for AD review. Not sure where she is with
respect to that review yet.
We need to decide what the change needs to
be and ping Allison on what she would prefer – another draft right now,
or wait until her review is complete, in case other changes need to be made.
Elizabeth
-----Original Message-----
From: KRUEGER,MARJORIE
(HP-Roseville,ex1) [mailto:marjorie.krueger@hp.com]
Sent: Wednesday, June 04, 2003
5:59 PM
To: 'Venkat Movva';
mbakke@cisco.com
Cc: 'black_david@emc.com';
'Elizabeth.G.Rodriguez@123mail.net'; Ips@Ece.Cmu.Edu (ips@ece.cmu.edu);
'Michele Hallak - Stamler'
Subject: RE: question about
iscsiTgtPortalAttributesTable
You
are not assuming something wrong, this has been overlooked in the current MIB
draft. iSCSIPortal table is OK, but iSCSITargetPortal should be indexed
by iSCSINodeIndex and iscsiIntrPortalAttributesTable should be deleted as there
is no such thing as an initiator portal group tag. Or alternatively, this
table should just be genericly named (iSCSIPortalGroupTable) and indexed
by iscsiNodeIndex, and then an initiator implementation can decide if they want
to populate entries with a conceptual portal group tag.
What
is the status of this draft? Can we update this for the Vienna IETF
draft?
Marjorie Krueger
Networked Storage Architecture
Networked Storage Solutions
Hewlett-Packard
-----Original
Message-----
From: Venkat Movva
[mailto:vmovva@istor.com]
Sent: Wednesday, June 04, 2003
4:46 PM
To: mbakke@cisco.com
Cc: marjorie_krueger@hp.com
Subject: question about
iscsiTgtPortalAttributesTable
Hi,
I have question about the
IETF-ISCSI-DRAFT-MIB.
Question:
Currently iscsiTgtPortalAttributesTable
is indexed by the iSCSIInstIndex and PortalIndex.
But there is no information about
the
target node to which it is associated with. According to
ISCSI Spec
I can have target network portal
that
can
belongs to multiple target portal groups as long as these
target portal groups belong to
different target nodes.
How do I add network
portal
with ( IP : 10.1.1.10 : port 8070) to
iSCSI
Instance = 1, TagetNode = 1, Tag = 2
and to
iSCSIInstance = 1 TargetNode = 2, Tag = 3 ?
In the current Draft MIB there is no
association
of Network portal with TargetNode.
Is this information missing in the DRAFT MIB
or am I assuming something wrong?
Sorry for sending direct mail to you.
Please let me know if there is
reflector ( forum) to post this type of questions.
Thanks
Venkat
