Re: iSCSI: Invalid PDU before login PDU - what happens

[Parthi <pamanick@npd.hcltech.com>]

Hi :

Lakshmi Ramasubramanian wrote:

> I guess you can use 0x04 (Protocol Error) for Reject
> reason.
>  
Parthi>  target will terminate the connection and the session
to terminate
         if it's the first
connection.

 
 -lakshmi

-----Original Message-----
From: LEMAY,KEVIN (A-Roseville,ex1) [mailto:kevin_lemay@agilent.com]
Sent: Thursday, July 18, 2002 11:25 AM
To: ips@ece.cmu.edu; 'Satran, Julian'
Subject: iSCSI: Invalid PDU before login PDU - what happens

What is the correct behavior for a target when an initiator sends a
full-feature phase PDU before the initial login PDU?

I believe that this is:

i-> Cmd PDU
t-> Login Response - Reject reason = Invalid during login
    FIN

but where is it documented in the Spec?

Parthi>  Draft -v14  6.8  Negotiation Failures says  ( Pg. no  10 9 )
     - During Login, any failure in negotiation MUST be considered a
       login process failure and the Login Phase must be termi-
       nated, and with it the connection. If the target detects the
       failure, it must terminate the login with the appropriate
       login response code.
 

 

Thanks,

Kevin

thanks,
parthi

-- 
http://san.hcltech.com