SORT BY:

LIST ORDER
THREAD
AUTHOR
SUBJECT


SEARCH

IPS HOME


    [Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

    RE: Coverage of Data Digest when using Header Digests



    
    
    yes,
    
    Julo
    
    "Barry Reinhold" <bbrtrebia@mediaone.net> on 22/01/2001 17:49:29
    
    Please respond to "Barry Reinhold" <bbrtrebia@mediaone.net>
    
    To:   mbakke@cisco.com, Julian Satran/Haifa/IBM@IBMIL
    cc:   ips@ece.cmu.edu
    Subject:  RE: Coverage of Data Digest when using Header Digests
    
    
    
    
    Ok,
         So if the bidi-read length and ADDCDB fields are not in the data
    digest
    then I assume we have to figure them into the header digest even though
    they
    are located past the header digets. Is that the expected behavior?
    
    -----Original Message-----
    From: mbakke@cisco.com [mailto:mbakke@cisco.com]
    Sent: Monday, January 22, 2001 10:22 AM
    To: julian_satran@il.ibm.com
    Cc: ips@ece.cmu.edu; Barry Reinhold
    Subject: Re: Coverage of Data Digest when using Header Digests
    
    
    
    Barry-
    
    In particular, the data digest covers only the SCSI Data part of an
    iSCSI message; the header digest covers everything else.  This means
    that in an 8k write, the data digest will cover only the 8k, and the
    header digest will cover everything else.
    
    Hope this helps,
    
    Mark
    
    julian_satran@il.ibm.com wrote:
    >
    > Barry,
    >
    > Considering that one of the reasons to have a separate header and data
    > digest was to enable data
    > to carried through proxies, virtualizers etc. the current thinking is
    that
    > the data digest will cover only the data and the header (including
    > extensions) will be covered by the header digest.
    >
    > Julo
    >
    > "Barry Reinhold" <bbrtrebia@mediaone.net> on 21/01/2001 21:50:04
    >
    > Please respond to "Barry Reinhold" <bbrtrebia@mediaone.net>
    >
    > To:   Julian Satran/Haifa/IBM@IBMIL
    > cc:
    > Subject:  Coverage of Data Digest when using Header Digests
    >
    > Julian,
    >      Is the Data Digest intended to cover whatever follows the 48 byte
    > iSCSI
    > header? In particular in a command frame which has a CDB > 16 bytes, uses
    > bidi, has immediate data, and is using both header and data digests -
    what
    > would the data digest cover?
    >                                                              - barry
    > reinhold
    
    --
    Mark A. Bakke
    Cisco Systems
    mbakke@cisco.com
    763.398.1054
    
    
    
    
    


Home

Last updated: Tue Sep 04 01:05:46 2001
6315 messages in chronological order