RE: iSCSI-countdown to new version

["Eddy Quicksall" <eddy_quicksall@ivivity.com>]

So a correction is needed in 2.12.2.

Also, if all other login phase PDUs MUST be immediate, Section 1.2.2.1 needs
change because it clearly implies the opposite.

Eddy

-----Original Message-----
From: BURBRIDGE,MATTHEW (HP-UnitedKingdom,ex2)
[mailto:matthew_burbridge@hp.com]
Sent: Thursday, September 13, 2001 12:41 PM
To: 'eddy_quicksall@ivivity.com'
Subject: RE: iSCSI-countdown to new version


Hi Eddy,

IMO 2.12.2 is incorrect and the initial login command MUST be immediate as
are all other login phase PDUs.  Therefore 1.2.2.1 is correct.

Cheers

Matthew

-----Original Message-----
From: Eddy Quicksall [mailto:eddy_quicksall@ivivity.com]
Sent: Thursday, September 13, 2001 5:15 PM
To: julian_satran@il.ibm.com; ips@ece.cmu.edu
Subject: RE: iSCSI-countdown to new version


Section 1.2.2.1 says:

  Command numbering starts with the login request on the first
  connection of a session (the leading login) and includes every
non-immediate
  command issued afterwards whether during login or in full-feature
  phase.

But 2.12.2 says:

  Login MUST be issued as an immediate request (I=1) except for the
  first Login request (C=0) of the leading connection that MUST have
  I=0.

Since all commands during login must have the I bit set, I believe 1.2.2.1
3rd line should read

  command issued afterwards in full-feature

Am I correct?

Eddy