SORT BY:

LIST ORDER
THREAD
AUTHOR
SUBJECT


SEARCH

IPS HOME


    [Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

    RE: ISCSI: NAA naming format



    Title: RE: ISCSI: NAA naming format

    WG Chair hat on

    The iSCSI draft has completed working group last call, and no more changes may be made to that draft, unless explicitly requested by the IESG or the ADs.

    So, it is unlikely that the iSCSI draft would be modified in the manner suggested below.

    That said, RFCs may be updated by other RFCs, and such updates are noted on the RFC web page.
    Should the proposal be accepted, this is likely what would happen in this case.

    Elizabeth Rodriguez
    IPS WG chair


    -----Original Message-----
    From: Mallikarjun C. [mailto:cbm@rose.hp.com]
    Sent: Thursday, November 07, 2002 9:42 PM
    To: Randy Jennings; ips@ece.cmu.edu
    Subject: Re: ISCSI: NAA naming format


    Good catch.

    The statement would need to be modified to state that: this version
    of the iSCSI draft allows only two name type designators, and using
    user-defined name type designators is prohibited.

    Implementations complying with the iSCSI RFC would then support
    only those two formats, while new name formats may in addition be
    supported based on compliance to additional RFCs, as may be approved
    by the WG from time to time.

    Thanks.
    --
    Mallikarjun

    Mallikarjun Chadalapaka
    Networked Storage Architecture
    Network Storage Solutions
    Hewlett-Packard MS 5668
    Roseville CA 95747
    cbm@rose.hp.com

    ----- Original Message -----
    From: "Randy Jennings" <randyj@data-transit.com>
    To: <ips@ece.cmu.edu>
    Sent: Thursday, November 07, 2002 8:50 AM
    Subject: ISCSI: NAA naming format


    > I will not be in the Atlanta meeting, so I will have to open this can of
    > worms here.
    >
    > > - NAA naming format for iSCSI (30 min)
    > draft-krueger-iscsi-name-ext-00.txt
    > > This draft proposes to add a new .naa naming format to iSCSI in
    > > addition to the current .iqn and .eui formats.  A significant
    > > motivation for this is an desire by T10 (ANSI organization that
    > > handles SCSI standards) to obtain consistent SCSI device
    > > naming across SCSI transports.
    > >
    > > The authors request that the IPS WG adopt this draft as an
    > official
    > > work item.  It would become a separate RFC rather than being
    > folded
    > > into the main iSCSI draft.
    > I first want to say that whether the NAA naming format is adopted or not
    > does not matter to me, but it matters to me if the following text is
    > left in the Proposed Standard version of the iSCSI draft:
    >
    > (pg39, line from start of document 2340)
    >    As these two naming authority designators will suffice in nearly
    >    every case for both software and hardware-based entities, the
    >    creation of additional type designators is prohibited.
    >
    > Now, it does not use the MUST language required by IETF drafts (as I
    > understand it), but prohibited is a strong word for me.  (On a side
    > note, it would be interesting to open up a thesaurus and search for
    > other such words in the draft (i.e. 'mandatory').)
    >
    > I do not want to see a sorry chap reading this draft, see the word
    > 'prohibited' and not ever worry about another name format ever being
    > made.  It gives this nice sense of (false?) security that made me like
    > math and standards in the first place.
    >
    > Sincerely,
    > Randy Jennings
    > Data Transit
    >
    >



Home

Last updated: Sun Nov 10 20:19:01 2002
12023 messages in chronological order