SORT BY:

LIST ORDER
THREAD
AUTHOR
SUBJECT


SEARCH

IPS HOME


    [Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

    RE: iSCSI: Out of order commands



    Robert,
    
    I am not saying that handling OOO commands will create more complexity 
    (targets already do that over several connections and it does not matter 
    for them). However allowing initiators to ship them out of order creates a 
    potential deadlock that does not appear otherwise.
    
    If a target is missing a command in a queue (and there are no errors) the 
    this command is bound to be first on some connection under the current set 
    of rules.
    
    If we allow OOO shipping then the missing command can be somewhere 
    "inside" the window on some connection and if the target has just filled 
    his queue and has room in the staging buffer only for the command it is 
    waiting for and that command happens to be the first to pass to SCSI   you 
    have a deadlock.
    
    
    Julo
    
    
    
    
    
    
    "Robert D. Russell" <rdr@mars.iol.unh.edu>
    07-11-01 23:13
    Please respond to "Robert D. Russell"
    
     
            To:     Somesh Gupta <somesh_gupta@silverbacksystems.com>
            cc:     Julian Satran/Haifa/IBM@IBMIL, ips@ece.cmu.edu
            Subject:        RE: iSCSI: Out of order commands
    
     
    
    Somesh, Julian:
    
    You state that dealing with OOO commands on the target
    will add substantial complexity on the target.
    Do you have any basis for that claim?  My impression from the
    plugfest is that most targets are already dealing with
    it.  Perhaps we need to hear from someone who is actually
    building a target for which this would be a real problem.
    
    If anything, what we are hearing from people who really
    are building initiators is that dealing with the requirement
    to send commands in order will introduce substantial complexity
    on the initiator.
    
    So why should we be saving complexity on (hypothetically) simple
    targets yet requiring complexity on real initiators?
    
    As far as the deadlock issue is concerned, if the only way
    that deadlock can occur with OOO commands on the same
    connection is during the use of immediate data (which is I
    think what Julian was saying), then shouldn't we change
    the standard to just say that -- if the initiator sends
    commands out of order on a single connection, then immediate
    data MUST NOT be used on that connection in order to avoid deadlock.
    
    This gives everybody what they want, since initiators who find
    it beneficial to deliver commands OOO will just negotiate
    immediate data off.  Those who really want to use immediate data
    will have to ensure that commands are sent in order.
    The tradeoff then becomes an implementation issue, not a
    standards issue, which is where it belongs.
    
    
    Bob Russell
    InterOperability Lab
    University of New Hampshire
    rdr@iol.unh.edu
    603-862-3774
    
    
    On Wed, 7 Nov 2001, Somesh Gupta wrote:
    
    > I think we should either have it as a MUST or not require
    > it (at both ends to get the real benefit). SHOULD is one
    > of those things that leads to implementation
    > burden and confusion, without perhaps the feature being
    > used. There are implementation as well as protocol
    > considerations mixed in here.
    > 
    > If we are to remove the restriction, we should (SHOULD)
    > get the maximum benefit from it, rather than to
    > accomodate an implementation choice. Out of sequence
    > commands, combined with the possibility of digest errors,
    > will add substantial complexity on the target side,
    > without corrosponding benefit in performance. If we change
    > this to SHOULD, we should also relax the requirement
    > to present commands on the target side to a SHOULD.
    > 
    > 
    > 
    > > -----Original Message-----
    > > From: owner-ips@ece.cmu.edu [mailto:owner-ips@ece.cmu.edu]On Behalf Of
    > > Julian Satran
    > > Sent: Wednesday, November 07, 2001 10:00 AM
    > > To: ips@ece.cmu.edu
    > > Subject: Re: iSCSI: Out of order commands
    > >
    > >
    > > Mallikarjun,
    > >
    > > I did not see a SINGLE performance improvement that results from OOO
    > > shipping.
    > > I would be bad engineering to give away the "no-deadlock" mechanism we
    > > have now for nothing.
    > > I have also the impression that the point about deadlock that I keep
    > > repeating is ignored or not understood.
    > > As we stand today commands can be shipped with Immediate data or 
    without
    > > and an implementer determined
    > > to squeeze maximum bandwidth and overlap command start with delivery 
    will
    > > choose not to work with immediate data
    > > (as you have pointed out) while a low performance software 
    implementation
    > > will use immediate data to minimize CPU cycles consumed.  However both
    > > will be guaranteed to work without deadlock as source and sink use the
    > > same ordering.
    > > Recovery is still a low probability event and should be handled with a
    > > different set of considerations in mind.
    > > As for the strictness of the recommendation - yes we could settle on
    > > SHOULD.
    > >
    > > Julo
    > >
    > >
    > >
    > >
    > > "Mallikarjun C." <cbm@rose.hp.com>
    > > Sent by: owner-ips@ece.cmu.edu
    > > 07-11-01 19:41
    > > Please respond to cbm
    > >
    > >
    > >         To:     Santosh Rao <santoshr@cup.hp.com>, ips@ece.cmu.edu
    > >         cc:
    > >         Subject:        Re: iSCSI: Out of order commands
    > >
    > >
    > >
    > > Santosh,
    > >
    > > I have only one comment on your responses.
    > >
    > > > Even a single connection target *MUST* implement a scoreboard. The
    > > > reason being that it can see out-of-order arrival of commands due to
    > > > commands being dropped on digest errors. In such a case, it must 
    block
    > > > further command processing until holes are filled.
    > >
    > > I made two convenient assumptions if you noticed, :-), one of which
    > > is that target forces session recovery on *any* error that it sees
    > > (ErrorRecoveryLevel=0) - including a dropped command due to a digest
    > > error.  With that assumption, a target can afford not to implement
    > > a scoreboard.
    > >
    > > As I said in a private note, I guess what primarily bothers me about
    > > OOO commands on a connection is that it requires the receiver to
    > > undo this "optimization" on its end - most notably on a single
    > > connection.  TCP experts may comment on how/if they dealt with a
    > > similar issue.
    > >
    > > OTOH, you had some valid comments on exceptions to ordering during
    > > connection recovery.  Perhaps we can move on by making Julian's
    > > proposed stipulation a SHOULD....
    > > --
    > > Mallikarjun
    > >
    > >
    > > Mallikarjun Chadalapaka
    > > Networked Storage Architecture
    > > Network Storage Solutions Organization
    > > MS 5668          Hewlett-Packard, Roseville.
    > > cbm@rose.hp.com
    > >
    > >
    > > Santosh Rao wrote:
    > > >
    > > > Mallikarjun,
    > > >
    > > > Some comments below.
    > > >
    > > > Regards,
    > > > Santosh
    > > >
    > > > "Mallikarjun C." wrote:
    > > > >
    > > > > Rod and Julian,
    > > > >
    > > > > This has been an interesting thread of discussion.  Some
    > > > > comments -
    > > > >
    > > > > 1.My first reaction was - allowing out-of-order command
    > > > >   transmission on the same connection deprives targets of
    > > > >   an implementation choice.  Targets which support only
    > > > >   single-connection sessions and only support session
    > > > >   recovery (reasonable assumptions in my mind) can no
    > > > >   longer afford *not to* implement a command scoreboard.
    > > >
    > > > Even a single connection target *MUST* implement a scoreboard. The
    > > > reason being that it can see out-of-order arrival of commands due to
    > > > commands being dropped on digest errors. In such a case, it must 
    block
    > > > further command processing until holes are filled.
    > > >
    > > > Thus, there is no getting away from implementing a sequencer at the
    > > > target. Given this, I think it is unreasonable to restrict initiator
    > > > implementation flexibility by imposing a strict ordering requirement
    > > > within the connection.
    > > >
    > > > > 2.Any end-node efficiency that is sought to be achieved
    > > > >   by transmitting CmdSNs out-of-order from the initiator
    > > > >   would be lost on the other end-node, since the target
    > > > >   now must wait for re-ordering the commands.
    > > >
    > > > It has to handle this situation anyway to deal with holes caused by
    > > > digest errors. This scenario occurs even with initiators that issue
    > > > commands in order.
    > > >
    > > > >
    > > > > 3.The flipside is that out-of-order transmission saves
    > > > >   link badwidth (albeit at the expense of end-node efficiency),
    > > > >   compared to idling the link waiting for outbound DMA.
    > > > >   We have to determine if this is a reasonable trade-off.
    > > > >
    > > > > 4.I can see Rod's point that prefetching all immediate
    > > > >   data can be a burden on the NIC resources.  But, two
    > > > >   questions -
    > > > >         - could the NIC not use unsolicited separate data
    > > > >           PDUs in these cases? [ I realize that InitialR2T
    > > > >           has to be "no" to let it happen... ]
    > > > >         - could the NIC have a memory architecture that
    > > > >           allows data prefetching for the next command (so
    > > > >           this is a non-issue from the protocol perspective)?
    > > > >           This scheme incurs one DMA delay for every new
    > > > >           burst of commands.
    > > > >
    > > > > 5.Another (perhaps radical at this point) option is to do
    > > > >   away with immediate unsolicited data, to stick only with
    > > > >   separate unsolicited data.  I would personally be okay
    > > > >   with the choice, particularly if this feature (that
    > > > >   helps software implementations) starts making hardware
    > > > >   design complicated/expensive.
    > > > >
    > > > > So, to summarize -
    > > > >
    > > > > option                         immediate         allow
    > > > >                                data in spec?     out-of-order?
    > > > >
    > > > > (A) (5) above                  no                no
    > > > > (B) No real reason to do this. no                yes
    > > > > (C) (4) above                  yes               no
    > > > > (D) pros & cons (1), (2) & (3) yes               yes
    > > > >
    > > > > >From the arguments I heard so far, I am leaning towards
    > > > > option A, and option C in that order.
    > > > >
    > > > > Comments?
    > > > > --
    > > > > Mallikarjun
    > > > >
    > > > > Mallikarjun Chadalapaka
    > > > > Networked Storage Architecture
    > > > > Network Storage Solutions Organization
    > > > > MS 5668 Hewlett-Packard, Roseville.
    > > > > cbm@rose.hp.com
    > > > >
    > > > > Rod Harrison wrote:
    > > > > >
    > > > > > Julian,
    > > > > >
    > > > > >         I don't understand what you are proposing here, what do 
    you
    > > mean by
    > > > > > "multiplexed" DMA?
    > > > > >
    > > > > >         The problem is that the DMAs take some time, the more 
    there
    > > are
    > > > > > queued the longer the last DMAs queued take to complete. Some
    > > commands
    > > > > > require DMAs to complete before they can be sent, i.e. Writes 
    with
    > > > > > immediate data, some commands do not, i.e. Reads and writes with 
    no
    > > > > > immediate data. The iSCSI HBA wants to be able to send commands 
    as
    > > > > > soon a possible, which for a read after a write can be before 
    the
    > > > > > write's DMA has completed. Maintaining an ordered queue for 
    commands
    > > > > > to be sent on the HBA is expensive and redundant since the 
    target
    > > > > > already knows how to queue commands before committing them to 
    its
    > > SCSI
    > > > > > layer.
    > > > > >
    > > > > >         The iSCSI HBA and its host driver are not at liberty to
    > > change the
    > > > > > order of commands from the OS, but the DMAs those commands need 
    are
    > > > > > unlikely to complete in the same order, and as I mentioned some
    > > > > > commands need no DMA. If the HBA can't send commands out of 
    CmdSN
    > > > > > order it has to maintain an ordered queue of commands waiting to 
    be
    > > > > > sent, and potentially buffer a lot of data. For an HBA this 
    makes
    > > > > > immediate data almost impossible to support.
    > > > > >
    > > > > >         I don't see the problem with allowing out of order 
    commands
    > > given
    > > > > > that the target already has to deal with very similar problems. 
    I
    > > > > > think we are getting in to the area of implementation choices 
    here,
    > > > > > which is inappropriate for a specification.
    > > > > >
    > > > > >         - Rod
    > > > > >
    > > > > > -----Original Message-----
    > > > > > From: owner-ips@ece.cmu.edu [mailto:owner-ips@ece.cmu.edu]On 
    Behalf
    > > Of
    > > > > > Julian Satran
    > > > > > Sent: Monday, November 05, 2001 10:06 PM
    > > > > > To: ips@ece.cmu.edu
    > > > > > Subject: Re: iSCSI: Out of order commands, was current UNH 
    Plugfest
    > > > > >
    > > > > > Rod,
    > > > > >
    > > > > > I don't see any reason why DMA operations cant be "multiplexed" 
    with
    > > > > > commands.
    > > > > > If you have scheduled a long outbound DMA you are doomed 
    regardless
    > > of
    > > > > > the
    > > > > > command ordering.
    > > > > > And if you have scheduled DMA operations piecemeal then you can
    > > insert
    > > > > > your commands in correct order.
    > > > > >
    > > > > > Julo
    > > > > >
    > > > > > "Rod Harrison" <rod.harrison@windriver.com>
    > > > > > 05-11-01 20:48
    > > > > > Please respond to "Rod Harrison"
    > > > > >
    > > > > >         To:     Julian Satran/Haifa/IBM@IBMIL, <ips@ece.cmu.edu>
    > > > > >         cc:
    > > > > >         Subject:        iSCSI: Out of order commands, was 
    current
    > > UNH
    > > > > > Plugfest
    > > > > >
    > > > > >                  [ Subject changed ]
    > > > > >
    > > > > > Julian,
    > > > > >
    > > > > >                  The ordering difference is introduced between 
    the
    > > > > > host
    > > > > > side driver
    > > > > > and the iSCSI HBA. The host side driver must present SCSI 
    commands
    > > to
    > > > > > the HBA in the order they are received from the OS to prevent 
    read
    > > > > > after write dependency failures. The HBA might reorder the 
    commands
    > > > > > depending on when DMA completes. The reordering can't be done 
    ahead
    > > of
    > > > > > time in the host driver since it doesn't know how long each DMA
    > > might
    > > > > > take. As long as the HBA assigns CmdSN in the order it receives
    > > > > > commands the desired host ordering is preserved.
    > > > > >
    > > > > >                  - Rod
    > > > > >
    > > > > > -----Original Message-----
    > > > > > From: owner-ips@ece.cmu.edu [mailto:owner-ips@ece.cmu.edu]On 
    Behalf
    > > Of
    > > > > > Julian Satran
    > > > > > Sent: Monday, November 05, 2001 12:35 AM
    > > > > > To: ips@ece.cmu.edu
    > > > > > Subject: RE: iSCSI: current UNH Plugfest
    > > > > >
    > > > > > Rod,
    > > > > >
    > > > > > I all examples give the point I find hard to understand is why 
    is
    > > the
    > > > > > ordering on the wire different from the presentation order to 
    the
    > > > > > initiator.  You can get as many overlaps as you want by 
    presenting
    > > the
    > > > > > commands to the initiator in the desired order.
    > > > > > What we are considering here is the case in which you want to 
    ship
    > > in
    > > > > > an
    > > > > > order different than the one you present the commands.
    > > > > >
    > > > > > Julo
    > > > > >
    > > > > > "Rod Harrison" <rod.harrison@windriver.com>
    > > > > > Sent by: owner-ips@ece.cmu.edu
    > > > > > 04-11-01 04:42
    > > > > > Please respond to "Rod Harrison"
    > > > > >
    > > > > >         To:     "Barry Reinhold" <bbrtrebia@mediaone.net>, "Dave
    > > > > > Sheehy"
    > > > > > <dbs@acropora.rose.agilent.com>, "IETF IP SAN Reflector"
    > > > > > <ips@ece.cmu.edu>
    > > > > >         cc:
    > > > > >         Subject:        RE: iSCSI: current UNH Plugfest
    > > > > >
    > > > > > Barry,
    > > > > >
    > > > > >                  In general I agree but I don't think this is as
    > > much
    > > > > > of a
    > > > > > corner case
    > > > > > as it at first appears. Targets will have code very similar to 
    that
    > > > > > needed to handle out of order commands to deal with digest 
    errors.
    > > > > > Targets also need to queue commands whilst waiting for both
    > > solicited
    > > > > > and unsolicited data to arrive. Queuing out of order commands 
    seems
    > > > > > little extra work.
    > > > > >
    > > > > >                  From an initiators point of view there are
    > > > > > efficiency,
    > > > > > and probably
    > > > > > performance gains to be had from sending commands out of order. 
    Bob
    > > > > > Russell gave the example of a read being sent whilst write data 
    DMA
    > > is
    > > > > > happening, and a similar situation can arise with DMA for writes
    > > > > > overtaking that of earlier writes if the initiator has multiple 
    DMA
    > > > > > engines. In this case the initiator might be forced to let the 
    wire
    > > go
    > > > > > idle if it can't send the data from completed DMAs as soon as
    > > > > > possible.
    > > > > >
    > > > > >                  We already have a command queue at the target 
    to
    > > > > > enforce
    > > > > > correct
    > > > > > serialisation of commands, doing the same thing at the initiator 
    is
    > > > > > redundant.
    > > > > >
    > > > > >                  Finally, I don't believe we should be writing a
    > > > > > standard
    > > > > > to work
    > > > > > around poor coding and test coverage, especially at the cost of
    > > > > > potential efficiency gains.
    > > > > >
    > > > > >                  I agree with Dave and Santosh that commands 
    being
    > > > > > sent
    > > > > > out of order
    > > > > > on a single session should be allowed by the standard.
    > > > > >
    > > > > >                  - Rod
    > > > > >
    > > > > > -----Original Message-----
    > > > > > From: owner-ips@ece.cmu.edu [mailto:owner-ips@ece.cmu.edu]On 
    Behalf
    > > Of
    > > > > > Barry Reinhold
    > > > > > Sent: Friday, November 02, 2001 5:24 PM
    > > > > > To: Dave Sheehy; IETF IP SAN Reflector
    > > > > > Subject: RE: iSCSI: current UNH Plugfest
    > > > > >
    > > > > > Using features such as out of order command delivery on a 
    connection
    > > > > > tend to
    > > > > > be the sort of things that lead to interoperability problems. It 
    is
    > > > > > unexpected and probably going to hit poorly tested code paths 
    even
    > > if
    > > > > > the
    > > > > > standard is written to allow it.
    > > > > >
    > > > > > >-----Original Message-----
    > > > > > >From: owner-ips@ece.cmu.edu [mailto:owner-ips@ece.cmu.edu]On 
    Behalf
    > > > > > Of
    > > > > > >Dave Sheehy
    > > > > > >Sent: Friday, November 02, 2001 4:19 PM
    > > > > > >To: IETF IP SAN Reflector
    > > > > > >Subject: Re: iSCSI: current UNH Plugfest
    > > > > > >
    > > > > > >
    > > > > > >
    > > > > > >> 3. Can commands be sent out of order on the same connection?
    > > > > > >>
    > > > > > >>    The behavior of targets is clearly specified in Section
    > > 2.2.2.3
    > > > > > on
    > > > > > >>    page 25 of draft 8, which says:
    > > > > > >>      "Except for the commands marked for immediate delivery 
    the
    > > > > > iSCSI
    > > > > > >>      target layer MUST eliver the commands for execution in 
    the
    > > > > > order
    > > > > > >>      specified by CmdSN."
    > > > > > >>
    > > > > > >>    Section 2.2.2.3 on page 26 of draft 8 also says:
    > > > > > >>      "- CmdSN - the current command Sequence Number advanced 
    by 1
    > > > > > on
    > > > > > >>      each command shipped except for commands marked for
    > > immediate
    > > > > > >>      delivery."
    > > > > > >>    but the meaning of the term "shipped" is vague, and does 
    not
    > > > > > >> necessarily
    > > > > > >>    require that the PDUs arrive on the other end of a TCP
    > > > > > connection
    > > > > > >>    in the same order that the CmdSN values were assigned to 
    these
    > > > > > PDUs.
    > > > > > >>
    > > > > > >>    Some initiators have been designed to send commands out of
    > > CmdSN
    > > > > > >>    order on one connection.  Consider the situation where 
    there
    > > is
    > > > > > only
    > > > > > >>    one connection and a high-level dispatcher creates a PDU 
    for a
    > > > > > SCSI
    > > > > > >>    command that involves writing immediate data to the 
    target.
    > > > > > This PDU
    > > > > > >>    is enqueued to a lower-level layer which has to setup, 
    start,
    > > > > > and
    > > > > > >>    wait-for a DMA operation to move the immediate data into 
    an
    > > > > > onboard
    > > > > > >>    buffer before the PDU can be put onto the wire.  While 
    this is
    > > > > > >>    happening, the dispatcher creates another unrelated PDU 
    for a
    > > > > > SCSI
    > > > > > >>    read command (for example), and when this PDU is passed to 
    the
    > > > > > >>    lower-level layer it can be sent immediately, ahead of the
    > > > > > previous
    > > > > > >>    write PDU and therefore out of order on this connection.
    > > > > > >>
    > > > > > >>    The standard clearly allows this to happen if the two PDUs
    > > were
    > > > > > sent
    > > > > > >>    on different connections, and seems to imply that this can
    > > also
    > > > > > happen
    > > > > > >>    when the two PDUs are sent on the same connection.
    > > > > > >>
    > > > > > >>    The suggestion is to put in the standard an explicit 
    statement
    > > > > > that
    > > > > > >>    this is allowed or not allowed, as appropriate.
    > > > > > >>
    > > > > > >>    If this is allowed, such a statement would avoid the 
    erroneous
    > > > > > >>    assumption being made by some target implementers that 
    within
    > > a
    > > > > > single
    > > > > > >>    connection, commands will arrive in order.
    > > > > > >>
    > > > > > >>    If this is not allowed, such a statement would avoid the
    > > > > > erroneous
    > > > > > >>    assumption being made by some initiator implementers that
    > > within
    > > > > > a
    > > > > > >>    single connection, commands can be put on the wire out of
    > > order.
    > > > > > >>
    > > > > > >> +++
    > > > > > >>
    > > > > > >> will add an explicit statement saying that this behaviour is
    > > > > > forbidden.
    > > > > > >> 2.2.2.1 will contain:
    > > > > > >>
    > > > > > >> On any given connection, the iSCSI initiator MUST send the
    > > > > > >commands in the
    > > > > > >> order specified by CmdSN.
    > > > > > >>
    > > > > > >> +++
    > > > > > >
    > > > > > >Why do you feel this behavior should be forbidden? Targets 
    already
    > > > > > have to
    > > > > > >order commands across the session. I don't see why it's a 
    problem
    > > to
    > > > > > extend
    > > > > > >that to the connection as well. I, for one, believe we should 
    take
    > > > > > >a liberal
    > > > > > >stance on this.
    > > > > > >
    > > > > > >Dave Sheehy
    > > > > > >
    > > >
    > > > --
    > > > ##################################
    > > > Santosh Rao
    > > > Software Design Engineer,
    > > > HP-UX iSCSI Driver Team,
    > > > Hewlett Packard, Cupertino.
    > > > email : santoshr@cup.hp.com
    > > > Phone : 408-447-3751
    > > > ##################################
    > >
    > >
    > >
    > >
    > 
    
    
    
    
    


Home

Last updated: Thu Nov 08 11:17:38 2001
7638 messages in chronological order