Re: SendTarget Options in UNH v-.11 code.

["shesha bhushan" <bhushan_vadulas@hotmail.com>]

Hi Robert,
  I agree with what you say. So what should I do to get the information 
about the targets. What command should I have to issue at the shell ?

Thanking You
Shesha


>From: "Robert D. Russell" <rdr@io.iol.unh.edu>
>To: shesha bhushan <bhushan_vadulas@hotmail.com>
>CC: cdeng@iol.unh.edu, <qtao@iol.unh.edu>, <ips@ece.cmu.edu>
>Subject: Re: SendTarget Options in UNH v-.11 code.
>Date: Sat, 24 Aug 2002 09:49:45 -0400 (EDT)
>
>Hi Shesha:
>
>There is no problem to be fixed here -- everything is performing exactly
>as it is supposed to!
>
>According to the standard, the SendTargets key can ONLY be sent during
>Full Feature Phase.  Therefore, when the initiator sends it during
>login (because of the iscsi_manage command you used), the target
>correctly gives an error and terminates the login.  The initiator,
>upon receiving the Login error response, also terminates the login
>and reports the error at the shell level.
>Nothing to fix -- what were you thinking should happen?
>
>Best,
>Bob Russell
>
>
>On Sat, 24 Aug 2002, shesha bhushan wrote:
>
> > Hi,
> >   I am using UNH iSCSI code on Redhat Linux boxes. How to specify the
> > "SendTarget" options at the initiator. If I specify as manage parameters
> > (./iscsi_manage InitiatorName=abc TargetName=xyz SendTargets=all host=0)
> > then at the target side it gives the following error ....
> >
> > 
>--------------------------------------------------------------------------
> > Aug 23 20:32:04 kernel: 1287: Got key: SendTargets=all
> > Aug 23 20:32:04 kernel: 
>../common/text_param.h:scan_input_and_process:2411:
> > ***ERROR*** SendTargets can only be used in full feature phase
> > 
>--------------------------------------------------------------------------
> >
> > Now at the initiator side it gives the followimg error at shell
> >
> > /proc/scsi/iscsi_initiator/0: Software caused connection abort
> >
> >
> > and the error that is logged in /var/log/message is
> >
> > -----------------------------------------------------------------------
> >
> > Aug 23 20:50:44 kernel: 
>../common/text_param.h:check_login_response:1848:
> > ***ERROR*** Login Response with StatusClass 0x02, StatusDetail 0x00
> >
> > Aug 23 20:50:44 kernel: 3702: parameter negotiation failed
> > -----------------------------------------------------------------------
> >
> > How can I fix this problem. Please advice.
> >
> > Thanks
> > Shesha
> >
> >
> >
> >
> >
> > _________________________________________________________________
> > MSN Photos is the easiest way to share and print your photos:
> > http://photos.msn.com/support/worldwide.aspx
> >
>




_________________________________________________________________
MSN Photos is the easiest way to share and print your photos: 
http://photos.msn.com/support/worldwide.aspx